We proudly offer many types and styles of professionally designed commercial and Home bar woodworking plans, pergola arbor plans, outdoor table plans, and outdoor  bar plans. Our collection will soon include curios, book cases, gun cabinets & other plans. Whether a woodworking professional or a Do-It-Yourselfer, you will find our plans to be of the highest quality available anywhere. We have the largest selection of bar plans on the internet. We stand behind every plan we sell.

 
 

Customizable Bar Plans for Contractors and Homeowners:

About the design...
These plan sets come in standard lengths which are based on average room sizes. Where possible, the parts are designed to be cross cut from standard dimensional lumber to minimize cutting time and eliminate the need for cutting diagrams. Plywood part sizes are optimized to accommodate standard sheet width. All dimensions in the plans are provided in both English and Metric units, and include separate cutting lists for each. Start with one of the plans below that is closest to the configuration you want. Make whatever length changes you require to the cutting list. To assist in changing the length of the bar, the cutting list identifies the parts you need to change.

"Lift gate" models are available for both straight and L shaped configurations to add seating capacity to your bar. The lift gate is mounted to the wall. The design includes "two hand release" safety locks to hold lift gate up when in open position. See below.

 

 Tools you will find useful:

 
Pocket hole jig This tool will save you hours of assembly time while providing strong joints that pull tight for a better appearance.

 

Dado cutter set To shape the arm rail you should have a 6 or 8 inch diameter dado cutter set for you table saw. A standard saw blade can be used instead of a dado cutter by making multiple passes. You should also have a 3/4 inch radius round over bit for your router.

Standard Features:

  • Full size contemporary "coved" arm rail design. Plans include complete instructions and setup info to make the arm rail using standard tools and equipment. You can also use pre-machined arm rail moldings to cut down on machine time.
  • Sectional base and top design to make room setup easy. This also makes "knockdown" easy for relocating the bar.
  • Designed to accommodate optional brass foot railing.
  • A drop-in hospitality/bar sink can be located anywhere below the bar top. Details are included.
  • Shelf area under the bar top is provided for bar ware and tools.
  • The lower base section can be open shelving or enclosed with hinged doors. Details are included.
  • Designed for "no mortise" decorative door hinging.
  • Recessed glass rail design with clean outs at ends
  • Cutting lists included in English and Metric units.
  • Length dimensions can easily be modified.

 Models and Dimensions (Birds Eye View)

Height of all models is 44" [111.76cm] from bar top surface to floor. 
 

 U-Shaped

 $19.95

U-Shaped Plan

DOWNLOAD

 

C-Shaped

      $19.95

C-Shaped Plan

DOWNLOAD


 L-Shaped (Standard Layout)

L-Shaped (Standard Layout)

DOWNLOAD

 

L-Shaped (Reversed Layout)

L-Shaped (Reversed Layout)

DOWNLOAD

 

 L-Shaped with Lift Gate (Standard Layout)

L-Shaped with Lift Gate (Standard Layout)

DOWNLOAD

 

L-Shaped with Lift Gate (Reversed Layout) 

L-Shaped with Lift Gate (Reversed Layout)

DOWNLOAD

 

  NOTE: When one end of the bar is to be positioned against a wall, the lift gate can simply be omitted if desired. No changes to the plans are necessary.

 

 Straight Bar with Lift Gate (Standard Layout)

Straight Bar with Lift Gate (Standard Layout)

 

DOWNLOAD

 

 

Straight Bar with Lift Gate (Reversed Layout)

Straight Bar with Lift Gate (Reversed Layout) 

 

DOWNLOAD

 

 Straight Bar Free Standing (Two Piece)

Straight Bar Free Standing (Two Piece) Can be lengthened up to 192" [487.68cm]

 

DOWNLOAD


 

Straight Bar Free Standing

Straight Bar Free Standing   Can be lengthened to 96" [243.84cm]

 

DOWNLOAD