VIEW CART
Our "Customizable" bar plans can easily be edited to facilitate length changing. Choose from Straight, L-shaped, U-shaped or C-shaped configurations. Uniform design throughout makes length changing easy. Full size "Chicago" rail design. Plans include complete instructions and setup info to make the arm rail. "Lift gate" models are available. Plans include dimensioning in both English and Metric units. All models accommodate a standard drop-in bar sink with faucet or "dry sink" below the bar top as well as other options.
Customizable Bar Plans for Contractors and Homeowners designed for those with average woodworking skills and equipment.
About the design...
Shape-Shifter plan sets come in standard lengths which are based on average room sizes. Where possible, the parts are designed to be cross cut from standard dimensional lumber to minimize cutting time and eliminate the need for cutting diagrams. Plywood part sizes are optimized to accommodate standard sheet width. All dimensions in the plans are provided in both English and Metric units, and include separate cutting lists for each. Start with one of the plans below that is closest to the configuration you want. Make whatever length changes you require to the cutting list. To assist in changing the length of the bar, the cutting list identifies the parts you need to change.
Pocket hole jig This tool will save you hours of assembly time while providing strong joints that pull tight for a better appearance. It saves you money, since fewer wood parts are necessary in the design. It also saves money on hardware that might otherwise be necessary for assembly. This inexpensive tool will pay for itself many times over. Click the link to the left for info!
Dado cutter set To shape the arm rail you should have a 6 or 8 inch diameter dado cutter set for you table saw. A standard saw blade can be used instead of a dado cutter by making multiple passes. You should also have a 3/4 inch radius round over bit for your router.
Tools you will find useful:
To make the parts, you should have a table saw, router, jig saw and an electric drill. To assemble your bar you will need some basic hand tools such as a hammer, power screwdriver and gluing clamps.
Secure on-line ordering is provided through PayPal.
You Do Not need a PayPal account to order.
All major credit cards are accepted
12 plans BUNDLE
Your purchase includes a full set of plans for each of the 10 bar layouts shown above plus the Classic Back Bar plans and the Classic Corner Back Bar plans. Each plan is an individual PDF download delivered immediately after checkout. Each file can be saved to your local device drive, printed as needed, and can be re-downloaded for a full year after purchase.
BACK TO TOP
add to cart
 
 
 
 
Your purchase includes a full set of plans for each of the 10 bar layouts shown above plus the Classic Back Bar plans and the Classic Corner Back Bar plans. Each plan is an individual PDF download delivered immediately after checkout. Each file can be saved to your local device drive, printed as needed, and can be re-downloaded for a full year after purchase.
U shaped Plan - Model U6X12FS
134" x 72" x 44" High.
Secure on-line ordering is provided through PayPal. You Do Not need a PayPal account to order. All major credit cards are accepted
Models and Dimensions (Birds Eye View) - NOTE: All bar plan model layouts match the design and specifications described above.
add to cart
C shaped Plan - Model C6X10FS
116 5/8" x 74" x 44" High.
L shaped Plan - Model L5X8FS
Standard Layout
96" x 60" x 44" High.
L shaped Plan - Model L5X8FSR
Reversed Layout
96" x 60" x 44" High.
12 foot bar Plan-
Model S12FS
144" x 26" x 44" High.
6 foot bar Plan-
Model S6FS
72" x 26" x 44" High.
Corner Back Bar Plan: The counter top is designed to accept an optional stainless steel bar sink. Design features an adjustable TV shelf in the top section with adjustable glass storage shelves above the sink area. Comes with details for optional glass doors to enclose the top shelf if you would prefer a display cabinet instead of a TV shelf. 38" x 38" x 90" High. Model BB-002
6 foot bar with Lift Gate Plan  - Model S6LGR
Reversed Layout
101" x 26" x 44" High.
6 foot bar with Lift Gate Plan  - Model S6LG
Standard Layout
101" x 26" x 44" High.
Classic Back bar plan: This two-piece wall unit is just what you need to enhance your bar room layout. The upper section has lots of room for bottles, steins, and collectables. The back wall mirror adds "depth" to the display. The counter top is designed to accept a standard size stainless steel bar sink which of course, is optional. Best of all, our plans make this beauty easy to build. 78" wide x 76 1/2" High x   19" Deep. Model BB-001
L shaped with Lift Gate Plan  - Model L5X8LGR
Reversed Layout
120" x 60" x 44" High.
L shaped with Lift Gate Plan  - Model L5X8LG
Standard Layout
120" x 60" x 44" High.
ADD TO CART
ADD TO CART
add to cart
add to cart
ADD TO CART
ADD TO CART
ADD TO CART
ADD TO CART
ADD TO CART
ADD TO CART
ADD TO CART
Customizable Bar Plans for Contractors and Homeowners designed for those with average woodworking skills and equipment.
Classic Back bar plan: This two-piece wall unit is just what you need to enhance your bar room layout. The upper section has lots of room for bottles, steins, and collectables. The back wall mirror adds "depth" to the display. The counter top is designed to accept a standard size stainless steel bar sink which of course, is optional. Best of all, our plans make this beauty easy to build. 78" wide x 76 1/2" High x   19" Deep. Model BB-001
Our "Customizable" bar plans can easily be edited to facilitate length changing. Choose from Straight, L-shaped, U-shaped or C-shaped configurations. Uniform design throughout makes length changing easy. Full size "Chicago" rail design. Plans include complete instructions and setup info to make the arm rail. "Lift gate" models are available. Plans include dimensioning in both English and Metric units. All models accommodate a standard drop-in bar sink with faucet or "dry sink" below the bar top as well as other options.
 
ALL PLANS ARE SOLD SEPARATELY or GET THE

12 PLANS BUNDLE BELOW
Back to Top
SOLD SEPARATELY or GET THE    12 PLANS BUNDLE BELOW
Standard Features:
-Full size contemporary "coved" arm rail design. Plans include complete instructions and setup info to make the arm rail using standard tools and equipment.
-Sectional base and top design to make room setup easy. This also makes "knockdown" easy for relocating the bar.
-Designed to accommodate optional brass foot railing.
-A drop-in hospitality/bar sink can be located anywhere below the bar top. Details are included.
-Shelf area under the bar top is provided for barware and tools.
-The lower base section can be open shelving or enclosed with hinged doors. Details are included.
-Designed for "no mortise" decorative door hinging.
-Recessed glass rail design with clean outs at ends
-Cutting lists included in English and Metric units.
-Length dimensions can easily be modified.
-"Lift gate" models are available for both straight and L shaped configurations to add seating capacity to your bar. The lift gate is mounted to the wall. The design includes "two hand release" safety locks that hold lift gate up when in the open position.
Standard Features:
-Full size contemporary "coved" arm rail design. Plans include complete instructions and setup info to make the arm rail using standard tools and equipment.
-Sectional base and top design to make room setup easy. This also makes "knockdown" easy for relocating the bar.
-Designed to accommodate optional brass foot railing.
-A drop-in hospitality/bar sink can be located anywhere below the bar top. Details are included.
-Shelf area under the bar top is provided for barware and tools.
-The lower base section can be open shelving or enclosed with hinged doors. Details are included.
-Designed for "no mortise" decorative door hinging.
-Recessed glass rail design with clean outs at ends
-Cutting lists included in English and Metric units.
-Length dimensions can easily be modified.
-"Lift gate" models are available for both straight and L shaped configurations to add seating capacity to your bar. The lift gate is mounted to the wall. The design includes "two hand release" safety locks that hold lift gate up when in the open position.
Now, for a limited time, save $10.00 off the regular price using coupon code: EASYBUCKS at checkout.
Now, for a limited time, save $5.00 off the regular price using coupon code: SAVE 5 BUCKS at checkout.