L Shaped Bar made from Pine Are you looking for simplified plans to build your bar? Our Speedy-Build models are designed for the amateur woodworker or handyperson. They can be built in a weekend or less, and require only basic equipment and tools to construct. They are designed using standard building materials including plywood, framing lumber and standard moldings. This makes them our simplest and most economical bars to build. The bartender's side interior is designed so that there is no exposed framing lumber for a neatly finished appearance. Our easy-to-use plans are professionally designed and fully illustrated using 3 dimensional assembly drawings.

Design Features:
- Front and sides are pine plywood with "beaded" surface.
- The base provides a built-in foot rest for "stand up" or bar stool use. No need to buy a brass foot rail.
- Constructed in sections, the bar can be unassembled, relocated, and reassembled if necessary.
- Interior framework is concealed, and fasteners are hidden from view. Inside surfaces are flat, making it easy to add special features such as a wine rack, adjustable shelves or even a 2.5 cubic foot mid-size compact refrigerator.
- Your Speedy-Build® Pine Bar can be constructed using basic tools and equipment.
- The bartender side has adjustable open shelving.

Speedy-Build Bar Plans are designed using standard dimensional lumber. Just cut the boards and moldings to length. All materials, including stain and finishes can be purchased from your local Home Center store.

Check Out the Easy Bar Plans Bundle Below!
L Shaped Bar with open shelving 8 foot bar with open shelving
L-Shaped Bar with Open Shelving Plans.
Plenty of open storage behind the bar. This is the easiest and most economical of our Speedy-Build II series L shaped bars. Build as shown, or build opposite configuration. Clean lines inside and out. All framing is concealed. Bottom shelf is removable, so area below can be used for utility lines. Bar can be separated into three sections for transporting. You can add your own wine rack, other accessories, or even a 2.5 cubic foot mid-size compact refrigerator without making any modifications to the plans. 96 3/4" x 48 3/4" x 46 1/4" High. Model L2-OS Average cost to build: $250

Straight Bar with Open Shelving Plans. Same specs as above. 96 3/4" x 28" x 46 1/4" High. Model S2-OS. Average cost to build: $175





































L Shaped Kegerator Pine Bar 8 Foot Kegerator Bar
L-Shaped Kegerator Bar Plans.
Housing accommodates standard size keg refrigerators up to 24" wide x 26" deep.Kegerator door is flush with the cabinetry for a built-in look. Top cutout allows for beer tower and access to glassware storage below. Build as shown, or build opposite configuration. Clean lines inside and out. All framing is concealed. Bottom shelf is removable, so area below can be used for utility lines. Can be separated into three sections for transporting. 96 3/4" x 48 3/4" x 46 1/4" High. Model L2-KS. Average cost to build: $275

8 Foot Kegerator bar plans. Same specs as above. 96 3/4" x 28" x 46 1/4" High. Model S2-KS. Average cost to build: $195



L Shaped Pine Wet Bar 8 Foot Wet Bar
L-Shaped Wet Bar Plans.
Add running water to your bar. Recessed counter accommodates a standard 15" x 15" drop-in stainless steel bar sink. Top cutout insures easy access to counter area. Lower section can hold a 1.7 cu. ft. compact refrigerator for beverages. Build as shown or build opposite configuration. Clean lines inside and out. All framing is concealed. Bottom shelf is removable, so area below can be used for utility lines. Can be separated into three sections for transporting. 96 3/4" x 48 3/4" x 46 1/4" High. Model L2-WB. Average cost to build: $285

8 Foot Wet Bar plans. Same specs as above. 96 3/4" x 28" x 46 1/4" High. Model S2-WB. Average cost to build: $185


L Shaped Mixing Bar with Speed Rail 8 Foot Mixing Bar with Speed Rail

L-Shaped "mixing Bar" wth speed rail.
Mixing counter accommodates a lift-out stainless steel pan for use as an ice bin. Top cutout insures easy access to mixing counter area. "Speed Rail" holds up to 10 bottles. Lower section can hold a 1.7 cu. ft. (or two) compact refrigerators for beverages. Build as shown or build opposite configuration. Clean lines inside and out. All framing is concealed. Bottom shelf is removable, so area below can be used for utility lines. Can be separated into three sections for transporting. 96 3/4" x 48 3/4" x 46 1/4" High. Model L2-SR. Average cost to build: $280

8 Foot "mixing bar" with speed rail. Same specs as above. 96 3/4" x 28" x 46 1/4" High. Model S2-SR. Average cost to build: $180



Outdoor Patio Bar in Knotty Pine 5 Foot Portable Bar
Patio Bar Plans.
Stationary or portable, this is our easiest bar to build and the most economical. Made of Ponderosa Pine, it is both sturdy and lightweight. The "outdoorsy" look of this 4 1/2 foot knotty pine bar makes it ideal for use with your covered patio, deck, or sun room. Sloped front edge on bar rail for comfort. No plywood used (no sheet materials to cut). Designed using all standard dimensional lumber to practically eliminate rip cutting. Just cut standard boards to length. Can be built in 2 days or less. Bartender's side has adjustable shelving. Accepts pre-finished shelves in standard size. Overall dimensions: 52 3/4" wide, 43" high, 21 1/4" deep. Model MB-001. Average cost to build: $150

Deck Bar Plans. "Rugged" yet functional, this bar can be kept outdoors all year long. Accepts up to a 10 foot umbrella with a 1.5" diameter pole and pulley lift system. The bartender's side has an adjustable counter height work shelf area and can accommodate a 1/2 keg of your favorite draft beer for picnics and pool parties. 76" Wide, 44" High, 29 1/2" Deep. Model DB-001 Average cost to build: $215

























































4 1/2 Foot Pine Compact Bar Outdoor Deck Bar for Beer Keg
Easy Compact bar plans
Features: Light weight design with top cutout for access to mixing counter on bartender's side. Mixing counter accommodates a lift-out stainless steel pan for use as an ice bin. Open shelving provides lots of room for glassware, mixing tools, etc. Dimensions: 54" x 24 3/4" x 46" High. Model HB-007 Average cost to build: $160

5 Foot Portable "mixing bar" with speed rail. Mixing counter accommodates a lift-out stainless steel pan for use as an ice bin. Top cutout insures easy access to mixing counter area. Full length "Speed Rail" holds up to 10 bottles. Twin wheel locking casters. Lower section can hold a 1.7 cu. ft. (or two) compact refrigerators for beverages. 60" x 28" x 47" High. Model PB-SR. Average cost to build: $165



Pine Back Bar with mirror and shelving Shallow Pine Back Bar with wine display rack
Speedy-Build back bar plans.
Upper section has mirrored back, stationary wood shelf and adjustable glass shelf. Plans include details for optional bar sink. Base can accept 2.5 cubic foot fridge or wine cooler at either end where no sink is installed. Plans include an optional 4 tier bottle rack for up to 16 bottles. 42" x 22" x 79 3/4" High. Model BB-003 Average cost to build: $295

Speedy-Build Shallow Back Bar Plans. Designed to match any Speedy-Build front bar, this back bar is less than 8 inches deep. Perfect for locations where floor space is limited. Unique wine display rack makes labels easy to see and keeps corks wet. Mirrored upper section with optional brass finish "dual access" stemware holders. Plenty of bottle storage below. The entire unit is supported by the floor but attached to the wall for a safe and secure installation. The flat back panel can also be cut out around existing wall outlets. The unit can be separated into two sections for transporting. Model S2-BB Average cost to build: $350
































Get the 14 Easy Bar Plans Bundle Here!
Your purchase includes ALL 14 "Easy" Bar Plans for the bar designs shown above making it easier for you customize your bar if you desire. Each plan is an individual PDF file delivered immediately after checkout. Each file can be saved to your local device drive, printed as needed, and can be re-downloaded for a full year after purchase.

Get the 14 plans bundle
Secure on-line ordering is provided through PayPal. You Do Not need a PayPal account to order. All major credit cards are accepted. If you have any questions about ordering, please contact us



















Need help planning your bar room or finding the right plans?

From Basement to Bar room

BACK TO TOP





Copyright 2008 - 2018 All Rights Reserved. "Shape-shifter" and "Speedy-Build" are registered trademarks of Precision Images Design